Posts

Logo for the Illegal Garage

Illegal Garage’s Alumacobra Switch Install

We just received a great video from a local customer building a Factory Five Roadster.  Jose G. has been building this car for a few years and he’s wiring it with our Infinitybox system.  He is installing our 20-Circuit Kit with inLINK.

He has a very slick and elegant aluminum dash that has modular panels.  He can easily remove and install panels for his switches and gauges.  It would certainly make working on the dash very easy.  Jose was recently at the London Cobra show in Ohio and saw a new set of switches he wanted to integrate into his dash.  These are nice looking billet buttons and he wants to use them for his lights, fans, wipers, fuel pump and one-button start.  These buttons are from Billet Automotive Buttons in Australia.  Installing these buttons shows the simplicity and the ease of wiring your car with our Infinitybox system.

First, our MASTERCELL inputs are ground triggered.  This gives you a lot of flexibility of how you can wire your switches.  This simple diagram shows how you wire a MASTERCELL input to your switch.

Simple diagram showing how to wire a switch to the Infinitybox MASTERCELL

Simple diagram showing how to wire a switch to the Infinitybox MASTERCELL

You can click on this link to get a more detailed blog post talking about wiring switches.

Another significant advantage of wiring your switches with our Infinitybox system is the fact that it takes very little current to turn on an input.  It takes less than 1 milliamp (1/1000 of an amp) to trigger an input.  That gives you the flexibility of using any switch to control the functions in your car.  With a lot of billet buttons, you have to use them to trigger a relay because they cannot handle the full load current of things like lights, starter solenoids and fans.  This is very easy with our Infinitybox system.

Since it takes so little current to turn on a MASTERCELL input, you can use very light-gauge wires between your switches and the MASTERCELL.  Our standard harnesses use 22-AWG wire.  This helps keep behind your dash clean and easy to service.

Lastly, we give you the power of advanced electrical control functions.  In the case of Jose’s car, he’s using our One-Button Start feature.  A single MASTERCELL input connected to a momentary button lets him start his car with ease.  Check out this blog post for more details on our One-Button-Start feature.

Jose just posted a great video to his YouTube channel, The Illegal Garage, showing off how he installed these billed buttons into his Cobra.  You can check it out below.


You can check out additional videos of his Factory Five Cobra build at his YouTube channel by clicking this link.

Click this link to get in touch with our team to learn more about how you can wire your car or truck with our Infinitybox system.

Picture of a finished Factory Five GTM wired with the Infinitybox system

Showing off inLINK in a Factory Five GTM

We have been working with a customer to finish the details of a Factory Five GTM build.  This car was wired with our 20-Circuit KitinMOTIONinRESERVEinTOUCH NETinVIRONMENT and inLINK.  Essentially, the car has the works.  It was originally built and wired by Shane Vacek at Vraptor Speed Works.  Izzy Dunn at Dunn Customz just finished the details on the car for the customer.

This video shows a walk around of the finished car.  It turned out great.  You can see the front POWERCELL mounted under the hood.

In this blog post, we want to feature one of the simplest accessories in the Infinitybox lineup.  That is inLINK.  inLINK gets you wireless control of your car or truck from a simple key fob.  You can turn on your lights remotely, pop your doors and trunk, and enable the Infinitybox security system.

Since your Infinitybox system is controlling the ignition, fuel pump and starter, we can easily stop someone from starting the car and driving off with it.   When you press the “lock” button on the inLINK key fob, we disable the ability to turn on the ignition, power the fuel pump and crank the starter.  Even if someone where able to get in the car with inLINK security enabled, the MASTERCELL completely blocks the ability to get the engine running.  The best part is that this is completely integrated into our Infinitybox system.  You do not need to buy a separate security or immobilizer system and integrate it into your wiring harness.

When you’re ready to drive the car, you simply press the “unlock” button on the key fob and you’re ready to go.

The owner of this car wanted door poppers.  They are using POWERCELL outputs to power a solenoid in each door.  They can push a button inside the car to pop these solenoids.  They also have buttons on the outside of the doors that let them pop the doors.  They also wanted to be able to pop the doors from buttons on the key fob.

All of this is very easy with the Infinitybox system.  Our team custom programmed the door popper outputs to pulse for 1 second.  The customer can push buttons on the key fob or use buttons on the door.  Very simple.

Here’s the coolest part of all.  The customer wanted buttons on the outside of the car to be able to pop the doors.  However, the customer does not want those buttons to work when security is enabled.  That is a very simple thing to do with our Infinitybox system.  As part of our custom programming, we set the MASTERCELL inputs to be disabled when security is on.  That way, no one can walk up to the car and open the doors unless they have the inLINK key fobs specifically programmed to that car.  The video below shows how this works.  You can see how security is enabled and disabled.  You can see how the doors can be popped from the inLINK key fobs and you can see how inLINK security disables the exterior switches.

Thanks to Izzy for sharing these pictures and videos.

Click on this link to contact our team to learn more about what our Infinitybox system can do for your build.

Factory Five Type 65 Daytona wired with the Infinitybox System.

Factory Five Type 65 Race Car

The Factory Five Type 65 Coupe is near and dear to our hearts.  It is the car that lead us down the rabbit hole to develop our Infinitybox system and all of the accessory components.  You can learn more about the kit from Factory Five at this link.  We just received an email from a customer who finished his Factory Five Type 65 race car and wanted to share pictures of the final product.  He wired this car with our Infinitybox 20-Circuit Kit.

Factory Five Type 65 Daytona wired with the Infinitybox System.

Factory Five Type 65 Daytona wired with the Infinitybox System.

Shaun L. spent almost 10 years building this as a race car.  He went down an unconventional path by using a GM Crate LS2 instead of the traditional Ford route.  That makes car really unique.  That LS2 is paired to a Tremec TKO600 transmission running through a Moser fabricated Ford 9″ rear end, geared at 3.55.  He also built a custom 3-link set up for the rear end.

Factory Five Type 65 Daytona wired with the Infinitybox System.

Factory Five Type 65 Daytona wired with the Infinitybox System.

It is race-prepped with an ATL Fuel Cell, Safecraft 3-Nozzle Fire Suppression System, Wilwood fixed 6-piston brakes in the front and 4-piston in the rear.

Factory Five Type 65 Daytona wired with the Infinitybox System.

Factory Five Type 65 Daytona wired with the Infinitybox System.

This picture shows the mounting of the MASTERCELL and the rear POWERCELL.  The MASTERCELL sits between the seats on the rear wall and the rear POWERCELL is mounted on the back aluminum of the car.

MASTERCELL & Rear POWERCELL in Factory Five Type 65 Daytona wired with the Infinitybox System.

MASTERCELL & Rear POWERCELL in Factory Five Type 65 Daytona wired with the Infinitybox System.

With these pictures, we received some very warm words from Shaun.  He said:

“I just wanted to share with you the completion of my Daytona Type 65 coupe after almost ten years. It has been a long build, with time and money always is short supply, but an awesome adventure. I am very impressed with your 3 cell system and even more in your continued support years after the initial sale. I have and will continue recommending your products to fellow builders and racers. Thanks again for all your assistance over the years, cheers.”

We take a lot of pride in the products and service that we provide.  Feedback like this is very important to us.

If you want to learn more about how our Infinitybox system can simplify the wiring in your Factory Five Type 65 Race Car or any other project, click on this link to contact our technical support team.

Factory Five Type 65 Daytona wired with the Infinitybox System.

Factory Five Type 65 Daytona wired with the Infinitybox System.

Picture of FFR 818 wired with the Infinitybox system

Factory Five 818 Wiring Completed

Here’s another great example of a customer’s car wired with our Infinitybox system.  Frank L. came to us a few years ago looking for a wiring system for his Factory Five 818.  He wanted his car to have all of the latest electrical functions that he could.  He wanted it to stand out from the rest in every possible way.

Frank used our 20-Circuit Kit as the foundation to wiring his car.  We have a specific configuration for the 20-Circuit Kit that is designed for the 818.  You can download an addendum to our manual that covers all of the Factory Five 818 wiring specifics by clicking this link.  He also added our inTOUCH NET so he could control the car from any smart phone or tablet.

In this picture, you can see the front POWERCELL, the MASTERCELL and inTOUCH NET mounted behind the dash.  This location for the MASTERCELL  puts it very close to the switches on the dash.  The POWERCELL is located so that all of the output wires are short.

MASTERCELL, front POWERCELL and inTOUCH NET mounted behind the dash of a Factory Five 818

MASTERCELL, front POWERCELL and inTOUCH NET mounted behind the dash of a Factory Five 818

In these next pictures, you can see the rear POWERCELL mounted on the rear firewall.  This is a great location because the run of wires from the rear POWERCELL to the lights, turn signals, starter solenoid and ECU are very short.

Rear POWERCELL in FFR 818 wired with the Infinitybox System

Rear POWERCELL in FFR 818 wired with the Infinitybox System

POWERCELL mounted in Factory Five 818

POWERCELL mounted in Factory Five 818

Frank wanted to control as much of his car from his tablet on the dash.  In this picture, you can see his tablet mounted on the center console.  He can use this as a touch screen to control his ignition, starter, lights, fans and other accessories in the car.

FFR 818 wired with Infinitybox 20-Circuit Kit and inTOUCH NET

FFR 818 wired with Infinitybox 20-Circuit Kit and inTOUCH NET

Here are a few additional pictures of the car.  We always love to see them in go-cart stage.  It really shows off the amount of work that it takes to build a car.

Factory Five 818 in go kart stage wired with the Infinitybox system

Factory Five 818 in go kart stage wired with the Infinitybox system

Frank sent us some great pictures of the finished car.  You can see them below.  Everything turned out great, especially the color of the car.

Side shot of FFR 818 wired with the Infinitybox System

Side shot of FFR 818 wired with the Infinitybox System

Rear shot of FFR 818 wired with Infinitybox

Rear shot of FFR 818 wired with Infinitybox

Picture of FFR 818 wired with the Infinitybox system

Picture of FFR 818 wired with the Infinitybox system

Dash of Factory Five 818 wired with the Infinitybox system

Dash of Factory Five 818 wired with the Infinitybox system

Rear shot of Factory Five 818 wired with the Infinitybox system

Rear shot of Factory Five 818 wired with the Infinitybox system

Thanks to Frank for sharing these pictures of his Factory Five 818 build.  The entire Infinitybox team is proud to be a part of this project.

Click on this link to contact our team to learn more about how our Infinitybox system can get you the latest electrical features in your car or truck project.